Bush Hog® Pull Dirt Scrapers

Specifications

Model	Pull Dirt Scrapers	Category Name	Agriculture	Year	2023
Sale Type	New	Manufacturer	Bush Hog	Odometer	0 miles
Price	Contact for price CAD

Description

Bush Hog® Pull Dirt Scrapers
DSP8, DSP10, DSP12 Series

Bush Hog’s new DSP Line of Pull-Type Drag Scrapers, with standard fixed axle or optional tilt axle, is ideal for moving large quantities of material, leveling, and finish grading. The DSP units come available in 8’, 10’ and 12’ widths. DSP scrapers equipped with the optional tilt axle can do everything the standard axle does, as well as remove material on an angle for sloping, terracing and ditching. Material can be transferred by dragging it to nearby locations and raising the scraper to deposit the load. Surfaces can be graded and leveled by scraping material from high areas and allowing accumulated material to flow under the grader blade into lower areas. The DSP scrapers are designed for 70 to 125 horsepower tractors and have replaceable wear plates on the sides.

MODELS

Models	DSP8	DSP10	DSP12
Horsepower Rating	70 to 125	70 to 125	70 to 125
Transport Width	97-inches	121-inches	144 3/16-inches
Working Width	96 3/16-inches	120 3/16-inches	144 3/16-inches
Capacity	1 3/4 cu. yds.	2 1/4 cu. yds.	2 3/4 cu. yds.
Tilt Axle	1525-lb	1645-lb	1700-lb
No Tilt Axle	1405-lb	1525-lb	1580-lb
Weight of Material in Weight Box	760-lb	760-lb	760-lb
Depth of Box	39-inches	39-inches	39-inches
Maximum Cutting Depth	5-inches below grade	5-inches below grade	5-inches below grade
Dump Clearance	21-inches	21-inches	21-inches
Maximum Tilt Depth To the Right	7-inches	7 5/8-inches	8 1/4-inches
Maximum Tilt angle	3 1/2°	3 1/2°	3 1/2°
Tongue Construction	4×4-inches x 1/4-inch tubing	4×4-inches x 1/4-inch tubing	4×4-inches x 1/4-inch tubing
Side Plate Construction	3/8×24 5/16-inches high x 39 3/4inches deep	3/8×24 5/16-inches high x 39 3/4inches deep	3/8×24 5/16-inches high x 39 3/4inches deep
Moldboard Construction	1/4-inch x 24 1/4-inches high when formed	1/4-inch x 24 1/4-inches high when formed	1/4-inch x 24 1/4-inches high when formed
Cutting Edge	1/2-inch x 6-inches reversible & replaceable	1/2-inch x 6-inches reversible & replaceable	1/2-inch x 6-inches reversible & replaceable
Cutting Edge Reinforcement	3-inches x 3-inches x 5/16-inch angle plus a 1/4-inch mold board = 9/16-inch at the cutting edge	3-inches x 3-inches x 5/16-inch angle plus a 1/4-inch mold board = 9/16-inch at the cutting edge	3-inches x 3-inches x 5/16-inch angle plus a 1/4-inch mold board = 9/16-inch at the cutting edge
Tires	New 9.5l x 15 8 PLY RIB TL on Rim 5 with 5.5 BHC	New 9.5l x 15 8 PLY RIB TL on Rim 5 with 5.5 BHC	New 9.5l x 15 8 PLY RIB TL on Rim 5 with 5.5 BHC
Maximum Transport Speed	20 MPH	20 MPH	20 MPH
Lift Cylinder	3 1/2-inches x 8-inches ASAE	3 1/2-inches x 8-inches ASAE	3 1/2-inches x 8-inches ASAE
Tilt Cylinder	3 1/2-inches x 8-inches ASAE	3 1/2-inches x 8-inches ASAE	3 1/2-inches x 8-inches ASAE

FEATURES

Performance Features

Available in 8-foot, 10-foot, and 12-foot widths
Optional tilt axle removes material on an angle for sloping, terracing and ditching.
DSP scrapers are designed for 70 to 125 horsepower tractors
Replaceable wear plates on the sides.