ID # 25079994

Case IH SB541C

Call for Price
SB541C SB541
 Built with additional heavy-duty features for high-volume operations to handle challenging baling conditions, season after season.
​​​​​​​Quick Specs
  • Bale Size: 14 x 18 in (356 x 457 mm)
  • Baler Pickup Width Inside: 75 in (1905 mm)
  • PTO Required Horsepower: 75 hp (56 kw)
Key Features of the SB541C
  • Heavy-duty hydraulically controlled side tension rails
  • Cast-iron hay wedges for a longer life
  • Long, heavy bale case for improved bale shape and easier handling
  • The fast plunger speed and longer plunger stroke packs uniform, dense bales in all crop conditions
  • ​High-strength steel used throughout the plunger mechanism​
Small Square Balers
Crank out high-quality bales up to 4.3 ft long in all kinds of crops and conditions, with heavy-duty 8-ball twine box and optional bale thrower.
SB Series Small Square Balers
Plenty of Sturdy Tines and an Adjustable Pickup Gauge Wheel Spray Later Into The Season With Miller Nitro Series Sprayers

Crank out high-quality bales in all kinds of crops and crop conditions with the SB Series small square balers. They are all about productivity. With three models, these balers get the job done right with high-capacity features like wide pickups and heavy-duty, smooth rotary feeding systems.

Sale Type
Case IH
PTO Required
62 – 75 HP
Plunger Speed
93 spm
Pickup # Of Tines
110 - 156
Bale Cross Section
14” x 18”
Standard Tire, Left
14L x 16.1, 6PR
Standard Tire, Right
11L x 14, 6PR
Feeder Description
Rotary feeder w/ packer
Plunger Stroke, In (mm)
284 (1832), right side entry
Pickup Position
Offset to right side
Sweep Width Inside, In (mm)
75 (1900)
Sweep Width On Flare, In (mm)
80 (2030)
Weight W/wire Tie, Lbs (kg)
No wire
Weight W/twine Tie, Lbs (kg)
3,940 (1787)
Plunger Stroke, In (mm)
30 (762)
Plunger Speed, Strokes/min
bale size
Density Control, Standard
Adj hydraulic density
Bale Length Range, In (mm)
12 to 52 (305 to 1321)
Bale Cross Section, H X W, In (mm)
14 x 18 (356 x 457)
Width, In (mm)
120 (3048)
Max. Height, In (mm)
71 (1803)
Length W/o Bale Chute, In (mm)
217 (5512)
main drive
PTO Driveline
Std three-joint, Category 6
Flywheel Weight, Lbs (kg)
248 (112)
Flywheel Diameter, In (mm)
22 (559)
bale thrower
Simple Design and Easy Operation Provides For A Uniform, Well-Shaped Bale
 Fill your wagon with bales as you make them with the optional Case IH BTX11 bale thrower, available with the SB531 and SB541.
  • Smooth, reliable hydraulic drive throws the bales
  • Handles bales up to 38 in (965 mm) long and up to 70 lb. (32 kg)
  • Easy operation from your tractor seat
  • Move the Case IH bale thrower to the left or right to fill the corners of the wagon
  • Adjust the belt speed to load the front or the back of the wagon
  • The simple design of the BTX11 allows for easy installation, adjustment and service
feeding system
Provides For A Uniform, Well-Shaped Bale Provides For A Uniform, Well-Shaped Bale
Huge 283-sq in (1,826-sq cm) feed opening allows SB balers to swallow large, uneven windrows. From here, a uniform, well-shaped bale is produced by the dependable Case IH feeding system:
  • High-throughput rotary feeding system delivers high capacity in any crop
  • Heavy-duty, double-rotating tines overlap to feed crop smoothly and continuously
  • Adjustable double-packer fork folds hay into the bale chamber
  • No-plug feeding system effortlessly moves crop from the pickup area to the bale chamber with minimum shatter loss
density control
Easy Bale Density Control Provides For A Uniform, Well-Shaped Bale
 All SB Series balers allow for easy bale density control by adjusting the tension applied to the bale chamber. For manual density control, tension springs are an economical choice.
  • Provides "set-it-and-forget-it" convenience
  • Ensures consistent bale weight and density
ties and twists
Handle Challenging Baling Conditions Provides For A Uniform, Well-Shaped Bale
Case IH small bales hold up to handling from the rack to the elevator and from the barn to the bunk.
  • Dependable Gear-driven Twine Knotters:
    • Hard-surface material at all wear points
    • Bill hooks are chrome plated for extra durability and reduced maintenance
    • SB541 is also available with a gear-driven wire twister
  • Large-Capacity Twine Storage Increases Field Time Between Refills:
    • SB531 — load six balls of twine
    • SB541 and SB541C — load eight balls of twine
    • SB541 wire-tie version features four-coil wire storage
tying mechanism
Tying Mechanism Type
HD Knotter
Tying Capacity (wire), Coils
No wire
Tying Capacity (twine), Balls
8 balls
sales literature
Literature Date
June, 2018
Literature Number
tractor requirement
Tractor PTO Power, Hp (kW)
75 (56)