ID # 25080305

Bush Hog® 2D Lift Disc Harrows

Call for Price
Overview

Bush Hog® Lift Disc Harrows
2D Series

Bush Hog’s line of lift disc harrows is designed to expand your tractor’s productivity potential! Whether you are a gardener, small farmer, wildlife manager, landscaper, operate a nursery or simply someone looking to break up the ground, the heavy duty frames and the heat-treated notched disc blades of Bush Hog® lift disc harrows make them the right choice for the job. The three disc harrow series in the Bush Hog® line are designed to fit tractors from 35 to 95 horsepower, giving you several choices to properly fit your tractor and application. Easy-to-adjust front and rear gangs allow you to change from light tilling to more aggressive cutting action with a simple pull of a pin and repositioning of the gangs. The sky, well actually the dirt, is the limit when using a Bush Hog® lift disc harrow to solve your groundbreaking needs.

Specifications
Model
2D Lift Disc Harrows
Year
2023
Sale Type
New
Manufacturer
Bush Hog
models
Model 2D78 2D96
Drawback HP Requirement 65 HP 65 HP
Hitch Type Cat. 1 Std and QH Cat. 1 Std and QH
Max Cultivation Width 78 in. 96 in.
Approximate WT Load on Each Blade 39-43 lbs. 39-41 lbs.
Disc Blade Side Notched 18 in. or 20 in. 18 in. or 20 in.
Disc Blade Spacing 9 in. Front, 7 1/2 in. Rear or 9 in. Front/Rear or 7 1/2 in. Front/Rear 9 in. Front, 7 1/2 in. Rear or 9 in. Front/Rear or 7 1/2 in. Front/Rear
Disc Blade Bearing Self-aligning, sealed ball bearings Self-aligning, sealed ball bearings
# of Blades 2 per gang 2 per gang
Forward Gang Angle Adjustment Front Gangs – 0°, 7°, 14°, 21° Front Gangs – 0°, 7°, 14°, 21°
Rear Gang Angle Adjustment Rear Gangs – 7°, 14°, 21° Rear Gangs – 7°, 14°, 21°
Mainframe Fornt Tube Construction 2 in. square tubing 2 in. square tubing
Gang Arm Construction 3 in. x 1 1/2 in. tubing 3 in. x 1 1/2 in. tubing
Gang Axle 1 in. square, high carbon steel 1 in. square, high carbon steel
Disc Scrappers Optional Optional

 

features

Performance Features

  • Adjustable gang angles, front and rear, using an easy-tograsp handle
  • Cat 1 standard and quick hitch on the 1D and 2D series, along with Cat 1 and 2 standard and quick hitch on the 3D series
  • Variable Blade Spacings Available: 9” front and rear gangs for tough-to-cut “New Ground” • 7 1/2 in. front and rear gangs for finer soil finishing • 9 in. front gangs / 7 1/2 in. rear gangs–the best of both worlds
Construction Features
  • Square and rectangle tube steel frames and gang tubes
  • Self-aligning, sealed ball bearings
  • Notched disc blades for maximum cutting action
  • 1 in. square, high carbon steel gang axle on the 1D and 2D series, with a 1 1/8 in. square, high carbon steel gang axle used on the 3D series
  • Available in tractor colors
  • Optional disc scrapers
 

 

Documents