ID # 25080307

Bush Hog® Pull Disc Harrows

Call for Price
Overview

Bush Hog® Pull Disc Harrows
DHP Series

Bush Hog’s new Pull Disc Harrows, the DHP Series, are designed for pulverizing soil, seed bed preparation and general tillage. Solid built units available in widths of 8’, 10’ and 12’, the DHP line of disc harrows are ideally suited for use by small farmers, food plot managers, ranchers, construction crews and nursery operators. The DHP Series units share many features available on larger, more expensive models, including front-to-rear leveling, a depth control system, adjustable-gang angles, and streamlined tubular gang hangers. Multiple blade spacing options are available with your DHP Series Pull Disc harrows. Blade spacings of 7-1/2” allow for fine, finish discing needed for seedbed preparation or 9 inches for breaking up and fracturing “new ground” or a combination of the two. Six multiple blade spacing options for each model are available with your DHP Series Pull Disc Harrows; 20” or 22” notched discs at each of following spacing options: 7.5” front & rear, 9” front & rear, 9” front and 7.5”rear. High strength 1-1/8” square gang axles, combined with tough gang components, and triple lip sealed ball bearings, ensure the DHP models are ready for the toughest jobs. Put a Bush Hog DHP disc harrow to work for you today.

Specifications
Model
Pull Disc Harrows
Year
2023
Sale Type
New
Manufacturer
Bush Hog
models
Model DHP8 DHP10 DHP12
Drawback Horsepower Requirement 40-65 hp 40-100 hp 55-100 hp
Hitch Type Pull-type w/clevis & hole for 1 1/4” pin Pull-type w/clevis & hole for 1 1/4” pin Pull-type w/clevis & hole for 1 1/4” pin
Approximate Transport Width 8’-10” 10’-10” 12’-4”
Max Cultivation Width 8’-6” 10’-6” 12’
Mainframe Width 60” 93 1/2” 93 1/2”
Approx weight load on each blade (lbs.) 85-9 84-94 82-92
Disc Blade Sizes & Types 20” or 22” Notched 20” or 22” Notched 20” or 22” Notched
Disc Blade Spacing 7.5” or 9” or a combination of both 7.5” or 9” or a combination of both 7.5” or 9” or a combination of both
Disc Bearing Type Triple lip sealed ball bearings Triple lip sealed ball bearings Triple lip sealed ball bearings
# of Bearings 8 12 12
Forward Gang Angle Adjustment 15, 16.5, 18, 19.5, 21 Degrees 15, 16.5, 18, 19.5, 21 Degrees 15, 16.5, 18, 19.5, 21 Degrees
Rear Gang Angle Adjustment 12, 13.5, 15, 16.5, 18 Degrees 12, 13.5, 15, 16.5, 18 Degrees 12, 13.5, 15, 16.5, 18 Degrees
Hitch Frame Construction 4” x 4” x 1/4” tubing 4” x 4” x 1/4” tubing 4” x 4” x 1/4” tubing
Side Mainframe Construction 4” x 3” x 1/4” tubing 4” x 3” x 1/4” tubing 4” x 3” x 1/4” tubing
Mainframe Width 60” 93 1/2” 93 1/2”
Mainframe Middle Tube Construction 4” x 3” x 1/4” tubing 4” x 3” x 1/4” tubing 4” x 3” x 1/4” tubing
Gang Arm Construction 4” x 3” x 1/4” tubing 4” x 3” x 1/4” tubing 4” x 3” x 1/4” tubing
Gang Axle 1 1/8” Square, High Carbon Steel
Front to Rear Leveling System Manual crank adjustment
Depth Control Cylinder stroke control spacers
Hydraulic Cylinder 3- 1/2” x 8” ASAE hydraulic cylinder
Transport Tire & Wheels Two 9.5L x 15 tires on 15” x 6” – 5 bolt wheels
Parking Jack Standard

 

features

Performance Features

Square and rectangle tube steel frames and gang tubes
Adjustable gang angles, front and rear
Variable Blade Spacings Available: 9” front and rear gangs for tough-to-cut “New Ground” • 7 1/2” front and rear gangs for finer soil finishing • 9” front gangs/7 1/2” rear gangs–the best of both worlds
Notched disc blades for maximum cutting action
1 1/8” square, high carbon steel gang axles
Available in tractor colors
Optional disc scrapers, Center Sweep Kit, Dual Wheel Transport Kit

 

Documents