Back
ID # 36663310

Miller Spray Air Technology Condor Spray-Air Booms

  • Miller Spray Air Technology Condor Spray Air Booms
Call for Price
 Get a Quote  Get Financed  Value a Trade  Contact Us  Book a Demo   Get Directions  Print
Overview

The most precise application technology available

When coverage is critical and you need deep canopy penetration to kill the target pest - be it weed, disease, or insect - look no further than to Miller’s Spray-Air air boom technology.

The unique air nozzle spray system puts instantaneous control of droplet size, spray pattern, and the speed of the air blast spraying into the crop right at your fingertips. There is no other technology available that will give you coverage as good as this, with the lowest application rates possible.

Available on the Nitro 5000 & 6000 series and Condor GC series with spray widths up to 120 feet.  Spray-Air air boom technology will improve your application efficiency and generate a superior return on your investment!
Specifications
Model
Spray Air Technology
Category Name
Agriculture
Year
2025
Sale Type
New
Manufacturer
Case IH
Air Fans
Crary hydraulically driven fans 1 fan on 90 and 103 foot booms 2 fans on 120 foot boom Fan controls and air tubes 6 inch air tubes run full width of boom
Boom Lines
1 inch poly pipe
Nozzle Spacing
Spray-Air - 10 inch nozzle centers starting on center Conventional - 20" nozzle centers starting on center Conventional option - 10 inch nozzle centers starting on center
Orifice Plates
0.034 Diameter Green Metering orifice plates are standard for Shear Guard Plus™ nozzles - other options available
Hydraulic System
90 and 103 foot booms Load sensing hydraulic pump, engine driven, oil cooler and completing hydraulic system parts 120 foot boom Load sensing hydraulic pumps (2), transmission driven, oil cooler and completing hydraulic syste
Nozzle Body Type
Wilger stackable nozzles on boom pipes 4 psi non drip caps supplying Shear Guard Plus™ nozzle on 10 inch centers 10 psi non drip caps for conventional spraying on 20 inch centers Spray-Air patented Shear Guard Plus™ nozzle bodies mounted to air pipe on 10 inch centers
Raven Flow Meter
RFM 15 flow meter
Boom Construction
Truss Style construction with individual wing tilt (wing tilt cylinders are equipped with accumulators).
Boom Widths Available
90 / 60 ft. 103 / 60 ft. 120 / 73 ft. All booms are available with 5 or 10 section on/off valves
how it works

Miller Spray Air Technology Condor Spray Air BoomsHow the Spray-Air technology works

• The Air Nozzles, spaced every 10” along the air boom, atomizes the spray droplets using Dial-A-Drop™ technology. This creates the optimum-sized droplets that are not affected by speed and pressure changes, ensuring a uniform application over the entire field.

• The Air Nozzle blasts the spray droplets deep into the crop canopy, ensuring complete top-to-bottom leaf surface coverage. No other application technology can measure up to the total plant coverage from the Spray-Air nozzle.

• Because of the smaller controlled droplets and directed air blast, the Air Nozzle allows for a very efficient use of water, often in the range of 2 to 5 gallons per acre for herbicides, and generally from 5 to 10 GPA with fungicides.
droplet size management

Miller Spray Air Technology Condor Spray Air BoomsDroplet Size Management

Follow the ASAE Droplet Classification Standard with Dial-A-Drop™ technology.
benefits

Miller Spray Air Technology Condor Spray Air Booms

Benefits of using Spray-Air technology*

• Maximize Productivity. The superior plant coverage from the use of the Air Shear Nozzle enables you to use only the minimum amount of herbicide required, and no more.

• Lowest Water Volumes. Use the lowest possible carrier volumes for herbicide, desiccant, insecticide, and especially fungicide applications. Spray from 2 to 10 gallons per acre.

• Fungicide Applications That Work. Simply stated, the Spray-Air technology is proven to be the best method to apply fungicides for superior disease control! Benefit from dense canopy penetration and total plant coverage with often only 5 to 10 gallons of water per acre!

• Application Versatility. Three application methods to choose from:

• Spray-Air Air Nozzle application to maximize coverage and efficiency

• Conventional flat fan nozzles for higher volume applications over 10 gallons per acre

• Use conventional nozzles + air blast from the Air Nozzle for classic Air Assist to maximize coverage in higher volume applications

• Environmental Stewardship. Spray-Air owners practice environmental stewardship by using only as much chemical and water as required, reducing soil and water carryover of crop protection products.

• Return on Investment. Operator surveys show $6 to $10 per acre in application cost savings
COPYRIGHT© 2025 Equipment Ontario Inc.  |  Policy  |  Privacy  |  Terms  |  Site Map  |  DEALER LOGIN