Miller IntelliSpray 2

•  IntelliSpray 2 maintains a constant droplet size by maintaining a constant spray pressure

–All chemicals have a recommended droplet size to do a accurate job of coverage

–Droplet size requirements are listed on the chemical label

–Droplet size is one of the criteria you use to choose your spray tips

•  This is what normally happens on a conventional system

–You choose a spray tip to match your needs – Lets say:

•  I want to spray at 14 mph

•  I would like to run at 35 psi

•  I would like to apply 15 gpa

•  I need a tip that will maintain a medium droplet size

•  As you speed up the pressure increases to maintain an accurate flow rate - Droplet size decrease or goes to a fine droplet size – Thus excessive drift occurs and you are off of the recommended droplet size

•  If you slow down the pressure decreases to maintain an accurate flow rate - Droplet size increase or goes to a course droplet size – You have less drift but again you are off of the recommended droplet size

IntelliSpray 2 maintains a constant droplet size by maintaining a constant spray pressure

– Whatever speed you are going 8 mph or 15 mph the pressure will remain constant at whatever pressure you chose

– If the pressure stays constant the droplet size stays constant

•  Thus doing a much better job of spraying

•  Less susceptible to drift

•  Maintaining droplet size requirements from the chemical producer