ID # 25080209

Bush Hog® 1812 Flex-Wing Rotary Cutter

Call for Price
Overview

Bush Hog® 1812 Flex-Wing Rotary Cutter

Light-Duty Pasture Flex-Wing

The 1812 Flex-Wing Rotary Cutter is designed for small tractors with a PTO horsepower of 50 to 75. The narrow cutting width of 12-feet makes this Flex-Wing ideal for rolling terrain where a wide rigid cutter will not perform as well. Grass, weeds, and brush up to 1 1/2-inch diameter are no match for the hardened parallel uplift blades. The narrow width is also ideal for orchards with prunings that must be cut into smaller pieces. The 1812 has maintenance friendly features, E-Z cleaning decks, high performance cutting and distribution, and it is built Bush Hog® tough for years of reliable service.

Specifications
Model
1812 Flex-Wing Rotary Cutter
Category Name
Lawn / Garden
Year
2023
Sale Type
New
Manufacturer
Bush Hog
models
Models 1812
Cutting Width 12′
Cutting Height 2″ – 13″2″ – 13″
Cutting Capacity 1 1/2″
Transport Width* 6′ 8″
Transport Height** 5′ 8″
Transport Length*** 13′ 7″
Approximate Weight (lb.) 3,200
Approximate Tongue Weight (lb.) 1,100
Minimum Tractor PTO HP 50
Hitch Cast Swivel Clevis
Center Deck 10ga
Wing Decks 10ga
Wing Cutting Angles 22° Down and 45° Up
Wing Level Adjustment Turnbuckles
Sidebands 1/4″ x 11 1/2″
Transfer Gearbox (HP) 160
Cutting Gearboxes (HP) 65
Input Driveline Category 4
Cutting Drivelines Category 3
Blade Holder 11ga Oval
Blades 1/2″ x 3″
Blade Tip Speed (fpm) 14,504
Axle Suspension Rubber Pads (Center)
Center & Wing Hydraulics 1 Hose Standard
Safety Tow Chain Standard
Distribution Baffles NA
PTO Driveline Support NA
Warranty

10-Year Gearbox Limited Warranty
1-Year Machine Limited Warranty

 

features

Performance Features

  • E-Z clean smooth decks are on the center and wings.
  • Wing “free float” without movement of wing hydraulic cylinder rod extends cylinder life.
  • Gearbox oil sight gauge allows the checking of the oil level in a few seconds.
  • PTO driveline holder is standard.
  • Wheel spindles are in halves for economy and ease of maintenance.
  • A single hydraulic hose is standard for lifting. Two hoses are optional for lifting wings independently of center section.

Construction Features

  • Center section cushions are at each axle arm to absorb shocks near the wheels.
  • Replaceable full length sideband skids give maximum protection and strength to the sideband.
  • Wheel hub cap retainers are standard to prevent loss of cap and hub grease.

Safety Features

  • Safety lights for highway travel are standard.
Documents