Back
ID # 25080222

Bush Hog® Pull Dirt Scrapers

  • Bush Hog® Pull Dirt Scrapers
Call for Price
 Get a Quote  Get Financed  Value a Trade  Contact Us  Book a Demo   Get Directions  Print
Overview

Bush Hog® Pull Dirt Scrapers
DSP8, DSP10, DSP12 Series

Bush Hog’s new DSP Line of Pull-Type Drag Scrapers, with standard fixed axle or optional tilt axle, is ideal for moving large quantities of material, leveling, and finish grading. The DSP units come available in 8’, 10’ and 12’ widths. DSP scrapers equipped with the optional tilt axle can do everything the standard axle does, as well as remove material on an angle for sloping, terracing and ditching. Material can be transferred by dragging it to nearby locations and raising the scraper to deposit the load. Surfaces can be graded and leveled by scraping material from high areas and allowing accumulated material to flow under the grader blade into lower areas. The DSP scrapers are designed for 70 to 125 horsepower tractors and have replaceable wear plates on the sides.
Specifications
Model
Pull Dirt Scrapers
Category Name
Agriculture
Year
2023
Sale Type
New
Manufacturer
Bush Hog
models
Models DSP8 DSP10 DSP12
Horsepower Rating 70 to 125 70 to 125 70 to 125
Transport Width 97-inches 121-inches 144 3/16-inches
Working Width 96 3/16-inches 120 3/16-inches 144 3/16-inches
Capacity 1 3/4 cu. yds. 2 1/4 cu. yds. 2 3/4 cu. yds.
Tilt Axle 1525-lb 1645-lb 1700-lb
No Tilt Axle 1405-lb 1525-lb 1580-lb
Weight of Material in Weight Box 760-lb 760-lb 760-lb
Depth of Box 39-inches 39-inches 39-inches
Maximum Cutting Depth 5-inches below grade 5-inches below grade 5-inches below grade
Dump Clearance 21-inches 21-inches 21-inches
Maximum Tilt Depth To the Right 7-inches 7 5/8-inches 8 1/4-inches
Maximum Tilt angle 3 1/2° 3 1/2° 3 1/2°
Tongue Construction 4×4-inches x 1/4-inch tubing 4×4-inches x 1/4-inch tubing 4×4-inches x 1/4-inch tubing
Side Plate Construction 3/8×24 5/16-inches high x 39 3/4inches deep 3/8×24 5/16-inches high x 39 3/4inches deep 3/8×24 5/16-inches high x 39 3/4inches deep
Moldboard Construction 1/4-inch x 24 1/4-inches high when formed 1/4-inch x 24 1/4-inches high when formed 1/4-inch x 24 1/4-inches high when formed
Cutting Edge 1/2-inch x 6-inches reversible & replaceable 1/2-inch x 6-inches reversible & replaceable 1/2-inch x 6-inches reversible & replaceable
Cutting Edge Reinforcement 3-inches x 3-inches x 5/16-inch angle plus a 1/4-inch mold board = 9/16-inch at the cutting edge 3-inches x 3-inches x 5/16-inch angle plus a 1/4-inch mold board = 9/16-inch at the cutting edge 3-inches x 3-inches x 5/16-inch angle plus a 1/4-inch mold board = 9/16-inch at the cutting edge
Tires New 9.5l x 15 8 PLY RIB TL on Rim 5 with 5.5 BHC New 9.5l x 15 8 PLY RIB TL on Rim 5 with 5.5 BHC New 9.5l x 15 8 PLY RIB TL on Rim 5 with 5.5 BHC
Maximum Transport Speed 20 MPH 20 MPH 20 MPH
Lift Cylinder 3 1/2-inches x 8-inches ASAE 3 1/2-inches x 8-inches ASAE 3 1/2-inches x 8-inches ASAE
Tilt Cylinder 3 1/2-inches x 8-inches ASAE 3 1/2-inches x 8-inches ASAE 3 1/2-inches x 8-inches ASAE
features

Performance Features

  • Available in 8-foot, 10-foot, and 12-foot widths
  • Optional tilt axle removes material on an angle for sloping, terracing and ditching.
  • DSP scrapers are designed for 70 to 125 horsepower tractors
  • Replaceable wear plates on the sides.
Documents
COPYRIGHT© 2024 Equipment Ontario Inc.  |  Policy  |  Privacy  |  Terms  |  Site Map  |  DEALER LOGIN